marine deck material and warm environment, is the first choice of modern timber, take a look at today's attention to detail and understanding of wood floor coverings.
(1) The best decking material and contraction of wood flooring and floor spacing changes with temperature expansion and contraction, it is recommended at approximately the same temperature and stored best composite decking cutting board marker spacing of floor coverings should be considered when the temperature of the pavement, wood The length of the plastic flooring, wood flooring and local diurnal temperature coefficient of expansion in different time periods, such as wood flooring pavement ends its pitch may vary in length, therefore, recommended that the wood floor a unit after all paved Fixed-length at the same time, that at the same time cutting machine floor ends with a hand-held stone, so to keep the same distance when laying wood floors need to reserve the right spacing, in order to facilitate the expansion and contraction between the shop floor drainage and ventilation ends When loading should be noted that two side surfaces of the floor spacing is generally 3 ~ 8mm; reserved 1.5 3.0 mm joints between two end faces of the floor; left between the floor and the wall 5 mm of the end face of the floor of the expansion joint position of the joints must be staggered
(2) Note that the quality and construction of the screw all the screws should be anti-rust treatment, or the use of stainless steel screws in addition to the choice of special screws, the use of wood screws should be pre-drilled pilot hole floor [8] pilot hole diameter should be no larger than the diameter of the screw 0.8 times; It is recommended to use an electric screwdriver to screw into place once forbidden spin out repeatedly screwed directly fixed with screws flat solid core wood flooring, wood screws central location should be away from the edge of the plate about 20 mm.
