TPU Rubber Timing Belt has been gradually replaced by the current
PU timing belt
We are expertise in manufacturing and exporting high quality PU Timing that are provided with thermo set resin body and steel traction cord.
Due to the cords, these belts are posses greater length stability and capacity to bear load. These are widely appreciated for their high power transmission capability, resistant to corrosion and abrasion.
Trapezoidal timing belt tooth profiles include the pitches (distance from the center of one tooth to the center of the next tooth) MXL (.08″) , XL (.2″), L (.375″), H (.5″), XH (.875″), XXH (1.125″). LT (.0816″), T2.5 (2.5mm), T5 (5mm), T10 (10mm), AT5 (5mm), AT3 (3mm), and AT10 (10mm). Trapezoidal timing belt profiles excel at registration and are commonly available. L, H, XH, and XXH are readily available in neoprene with fiberglass reinforcements. T2.5, T5, T10, AT3, AT5, and AT10 belts are typically offered in urethane with steel reinforcements.
MXL and XL belts are typically offered in neoprene with fiberglass reinforcements, urethane with kevlar reinforcements, or urethane with polyester reinforcements.
LT pitch is typically offered in urethane with Timing Belt Manufacturers in China kevlar reinforcements or urethane with polyester reinforcements.
