But one drawback of timing V Belt is that you need to change them every once in a while.
When the timing belt slides only one tooth, the engine stops operation. In several cars, it will generate expensive damage, especially for pistons and valves.
When the timing belt falls or malfunctions, you will not be able to start the engine. If this happens, you should not try to start the engine again.
How to check the belt:
1. Turn the engine off.
2. Open the hood of the car.
3. Locate the belts, which are located on the front of the engine. If you have a rear-wheel drive car, the front of the engine is usually adjacent to the front bumper and heatsink.
Otherwise, if it is a front-wheel drive car, the front of the engine is usually adjacent to the fender.
4. Please note that there are 2 or more Drive Belt, depending on the car model.
